They are now one and the same…

https://k9mail.app/2022/06/13/K-9-Mail-and-Thunderbird

I often recommend mailinabox for the same thing…

On android: have you tried Thunderbird with davx5 as the connector?

I have suggested people start with MailInABox and go from there…

https://mailinabox.email/

I tried the ellis3d model and while I hadn’t got all my start macros together, first time I ran it I crashed the nozzle into the bed and gouged it.

Later attempts with a 0.6mm nozzle also gave me inconsistent and hard to read outcomes.

Instead, I use this two box method on opposite corners of the front of the bed:

https://forum.vorondesign.com/threads/how-to-confirm-your-pressure-advance-value-is-correct.23/

Since then, coupled with the rest of the ellis3D tuning guide, my printer has been DIALLED…

Check your z offset, first layer squish and extrusion multiplier, then pressure advance.

That looks like too much filament or too close to the bed. Some of the edge artifacts could be pressure advance as well.

I spent a year chasing those problems out of a printer, and had hundreds of FL tests that looked just like that.

If you’re interested, Ellis 3D tuning guide is amazing. (I use a different pressure advance calibration method, but the rest has been bang on for me…)

I dipped my toe in the s76 pool with a fully specced lemp10.

It was by far the best Linux experience I’ve had on a laptop to date, but I still ended up back on an m2 mbp…

2 killer issues were:

1. finding realistic personal replacements for fusion360 and Affinity Designer. (freecad and inkscape just aren’t for me); and
2. The hardware just worked together better on the Mac (BT, audio, screen, WiFi, networking etc…).

I’m planning on taking my m2 mbp to asahi once the fingerprint scanner is working and dual booting for cad and vector graphics apps if I can’t get crossover versions working.

Net:Net I want to like s76, but the LEMP ended up basically the same price as the MBP and the Mac hardware was vastly superior (screen, audio, power management, etc)

I’ll try Linux again on my next laptop purchase again…

I spent a year trying to get my Prusa factory assembled mk4s to print properly. Prusa support even eventually sent me a full replacement printer that had the EXACT same problem out of the box.

I returned it, bought an LDO Voron kit for a 2.4 350mm and haven’t looked back.

The kit had pre made harnesses, which was 100% the right move for me.

(Incidentally, the drawers for my desk I was trying to print on the Prusa originally are now printed and finished on the Voron, and working great…)