Right now all it has is a plotter adding but I’m also making a mount for a mill and lasercutter. It’s meant mostly for making circuit boards but should be able to handle other projects as well.
It’s designed in FreeCAD and some parts were sourced from discarded laboratory devices from my job as well as a broken 3D printer.
Here’s a link to the FreeCAD in its current form. I’m not happy about Google but this is to be shared for free so it’s okay.
https://drive.google.com/file/d/1TaGmB2l-2IpyjhtpyuxbR6gJtIwyiHvx/view?usp=drivesdk
Right now it’s a bit messy but I intend to post it to printables.com later when it’s fully done.
The video is sped up 8x. I think it can handle this speed realtime as well.
The issue with the Z axis is not only the slider but also the threaded rod. Just a few thoughts/experiences on it based on my experience with the MPCNC and various different changes to Z axis group people made:
rigidity of the axis is paramount. When the router moves it does move toward the material. If there is not enough rigidity the material will push the router bit away variably and an angle is created which then exercises pressure on the router bit, creating enormous loads and usually kills it - which is bloody dangerous.
The other issue is the weight of the spindle. A makita RT0702C is around 2kg, but has its drawbacks. A water cooled “China spindle” weights around 5. That is, from my experience, too much for one threaded rod.
Don’t get me wrong, your design is great and imho you are onto something - it removes a lot of other issues the MPCNC has and might be the perfect middle ground between “MPCNC” and “full aluminium build”. I like it a lot for this.